Send Inquiry

Request To Call Back

Primary Tile Adhesive

Get a Price/Quote

Primary Tile Adhesive Specification

Tensile Strength
>1.5 N/mm2

Packaging Size
20 Kg

Types Of Chemical
Polymer Modified

Features
High strength, Water resistant, Non-shrink

Glue thickness
3mm to 12mm

Hardness
Hard Set

Adhesive Type
Cementitious

Storage Temperature
Below 30C

Form
Powder

Shelf Life
12 months

Material
Polymer modified cementitious adhesive

Holding Power
Strong Bonding

Surface Of Application
Concrete, Plaster, Walls and Floor

CAS No
9003-20-7

Other Names
Tile Bonding Adhesive

Usage
For fixing all types of ceramic, vitrified, natural stone tiles and mosaics on floors and walls

Grade
Industrial Grade

Purity
99%

Application
Tile Adhesion

Color
Grey

Physical State
Powder

Mixing Ratio
Add approx. 5.5-6.5 Ltr of clean water to 20 Kg powder

Coverage
3.5-4 kg/m2 for 3mm thickness

Odor
Odorless

Setting Time
Initial Set: 4 hours, Final Set: 24 hours

Toxicity
Non-toxic

Water Resistance
Excellent

Compressive Strength
>7.5 N/mm2

Application Temperature
+5°C to +35°C

Open Time
20-25 minutes

Fire Resistance
Non-flammable

Pot Life
2-3 hours at 27°C

Primary Tile Adhesive Trade Information

Payment Terms
Cash in Advance (CID)

Supply Ability
1000 Per Month

Delivery Time
7-10 Days

Main Domestic Market
All India

About Primary Tile Adhesive

GKV AAC KONARK Block Joining Mortar is a pre-mipre packed Cemenitious adhesives forjoining the AAC blocks, it is cost effective and easy to use product with no curing required at site. GKV AAC KONARK block joining mortar is a Polymer based non shrinkable, self curing mortar material with premix of grey cement, graded sand and polymer for better binding properties.

Preparation & Application

MORTAR MIXING: In a clean bucket, mix AAC Block Joining Mortar in 25-30% of water.
MIXING BY MIXER :Mix first for 5-10 min by electrical mixer or hand mixer till homogeneorusly
MORTAR REMIXING: Mix again for 2-3 minutes. Now thin bed mortar is ready to use.
CLEAN SURFACE :Before applicationclean the surface of blocks using suitable tool like brush so that any foreign material is not held on the blocks.
WET SURFACE: Wet the surface of blocks before applying mortar.
MORTAR SPREAD: Should be spread AAC Block Joining Mortar with 3-4mm thickness.
DND: Do not disturb the wall after application of mortar for at least 24 hours.
SETTING TIME :The setting time is affected by climatic conditions, allow stand-alone accordingly.

High-Strength & Versatile Application

This tile adhesive offers a reliable solution for securing ceramic, vitrified, and natural stone tiles as well as mosaics to both floor and wall surfaces. Its polymer-modified formula enhances adhesion, suitable for use on concrete, plaster, and a range of substrates. It's ideal for heavy-duty industrial and residential environments alike.

Simple Mixing and Application

For best results, mix 20 kg of powder with approximately 5.5-6.5 liters of clean water. Its open time of 20-25 minutes and pot life of 2-3 hours at 27C give ample working time. Apply at a 3mm to 12mm thickness, ensuring even spread to achieve strong, lasting tile bonds.

Safety & Environmental Features

Non-toxic, odorless, and non-flammable, this tile adhesive ensures safety for users and the surroundings. Its water resistance and high bonding strength make it suitable for both wet and dry areas, providing long-term stability and minimizing maintenance needs.

FAQ's of Primary Tile Adhesive:

Q: How should I mix Primary Tile Adhesive for optimal performance?

A: To prepare the adhesive, gradually add 20 kg of powder to 5.5 to 6.5 liters of clean water. Mix thoroughly to form a smooth, lump-free paste. Use a mechanical mixer where possible for uniform consistency.

Q: What surfaces are suitable for applying this tile adhesive?

A: Primary Tile Adhesive can be applied to concrete, plaster, walls, and floors. It is suitable for both interior and exterior installations, thanks to its strong bonding and water resistance.

Q: When can I start grouting after installing tiles with this adhesive?

A: You should begin grouting once the adhesive has reached its final set, which occurs 24 hours after tile installation to ensure a solid bond and optimal performance.

Q: Where can this adhesive be used?

A: It is ideal for a wide range of environments, including residential, commercial, and industrial settings. Use it on bathroom walls, kitchen floors, outdoor patios, and any area requiring durable tile installation.

Q: What are the benefits of using a polymer-modified cementitious adhesive?

A: Polymer modification enhances adhesion, flexibility, and water resistance. This means tiles are less likely to lift, crack, or absorb water, ensuring a long-lasting and durable installation.

Q: Is Primary Tile Adhesive safe to use in enclosed spaces?

A: Yes, the adhesive is non-toxic and odorless, making it safe for use in both indoor and outdoor environments, including enclosed or poorly ventilated spaces.

Q: What is the recommended thickness for applying the adhesive, and what coverage can I expect?

A: Apply the adhesive at a thickness of 3mm to 12mm. For a 3mm layer, coverage is approximately 3.5-4 kg per square meter, ensuring efficient use of the product.

Tell us about your requirement